EasyManua.ls Logo

Samsung AE080BXYDGG - Key Features of the EHS(SPLIT); Key Features of the MONO HT

Samsung AE080BXYDGG
170 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
General Overview
Samsung Electronics 5
2-1-1 Key features of the EHS(SPLIT)
Integrated Heating & Cooling system
Plate Heat exchanger is a integral part in heating & cooling system. For user’s convenience, PHE is integrated into the system.
This concept will help space saving and lower costs for pipe line reduction.
Running Costs-Reduction of Up to 33.5%
Samsung EHS, known for its world class efficiency (12kW floor heating system with 4.63), can reduce 33.5% of your running costs
as compared to a gas boiler.
High Performance at Low Temperature
Samsung EHS is made up of an inverter compressor optimally operated according to the outdoor temperature, offering heating
performance of 90% at -10°C and reliable frost protection at -25°C.
Heat pump operating range of DHW : -25 ~ 35 °C
At the temperature -25 °C ~ -20 °C, operation is available but capacity cannot be guaranteed.
2-
1-2
Key features of the MONO HT
Hot water temperature (Max. LWT 70°C )
T
he R-32 refrigerant heatpump system has implemented a maximum discharge water temperature of 70°C even
at low ambient temperature.
Extended Heat pump operating rage (-30°C ~ 43°C)
T
he low-temperature operation range has been extended to -30 °C to enhance the reliability of low-temperature
heating.
High heating performance
I
t guarantees 100% performance even at -25°C.
* Based on a leaving water temperature of 55°C. Not available on the 12kW and 14kW single-phase models.
Low noise ( 35dB(A) @3m )
By improving major parts, noise level has been greatly reduced compared to the conventional.
Using a 4-Step Quite Mode, keep it as low as 35dB(A)*

Table of Contents