What to do if water pump is on but flow S/W is off in Samsung Heat Pump?
If the water pump is on but the flow S/W is off, it indicates that the water flow is not sufficient. For models AE160JNYDEH and AE160JNYDGH, ensure the water flow is greater than 12LPM. For models AE090JNYDEH and AE090JNYDGH, ensure the water flow is greater than 7LPM.
What does Flow S/W ON error mean for Samsung Heat Pump?
If a Flow S/W ON error occurs with your Samsung Heat Pump, it means the flow S/W is ON in 10 minutes while the water pump signal is OFF.
What does Flow S/W OFF error mean for Samsung Heat Pump?
If a Flow S/W OFF error occurs with your Samsung Heat Pump: it can happen in 30 seconds if the flow S/W is OFF while the water pump signal is ON during starting, or it can happen in 15 seconds if the flow S/W is OFF while the water pump signal is ON after starting.
How to fix Samsung Heat Pump wired remote controller thermistor SHORT or OPEN?
To troubleshoot a wired remote controller thermistor SHORT or OPEN in your Samsung Heat Pump, check its resistance (10kohm@25 °C for the hydro unit, 200kohm@25 °C for the DHW Tank and Solar). Also, verify its location according to the diagram and its contact status with the pipe. If these steps don't resolve the issue, consider replacing the parts.
General| Brand | Samsung |
|---|---|
| Model | AE090JNYDEH |
| Category | Air Conditioner |
| Language | English |
To Next Page
