To Next PageTo Next Page
Need help?Do you have a question about the Samsung AJ036JCJ5CH and is the answer not in the manual?
General| Model | AJ036JCJ5CH |
|---|---|
| Refrigerant | R410A |
| Power Supply | 220-240V/50Hz |
| Power Source (Φ/V/Hz) | 1/220-240/50 |
| Outdoor Unit Noise Level | 50 dB |
| Air Flow Rate (Cooling, m3/min) | 10 m3/min |
| Air Flow Rate (Heating, m3/min) | 10 m3/min |
Guidelines for safe and proper installation of the air conditioner.
Electrical safety, connection, and circuit breaker requirements.
Safety guidelines for operating the air conditioner.
Procedures and considerations for environmentally sound unit disposal.
Additional safety precautions and handling advice.
Highlights key features and benefits of the air conditioner series.
Detailed technical specifications for various indoor and outdoor units.
Lists included accessories and their specifications.
Step-by-step guide for disassembling and reassembling indoor units.
Step-by-step guide for disassembling and reassembling outdoor units.
Identifies error codes and their corresponding check methods for indoor units.
Instructions for configuring unit settings via the remote controller.
Essential checks before diagnosing operational issues.
Procedures for testing unit functionality and performance.
Diagnosing issues based on observed symptoms and error codes.
Guidelines for inspecting Printed Circuit Board (PCB) components.
Visual layout and list of components for indoor unit PCB.
Visual layout and list of components for outdoor unit PCB.
Electrical schematic for indoor unit connections.
Electrical schematic for outdoor unit connections.
Guidelines for choosing suitable locations for unit installation.
Specific requirements for indoor unit placement.
Specific requirements for outdoor unit placement.
Recommended placement for optimal remote control signal reception.
Procedures for connecting pipes and purging the refrigerant circuit.
Steps for refilling refrigerant after installation or maintenance.
Guidelines for adjusting refrigerant charge based on pipe length.
Specified torque values for flare nut connections.
Steps for the pump down procedure when moving or replacing units.
Decoding the model name structure for indoor and outdoor units.
Visual representation of refrigerant flow for different models.
Reference for pressure and capacity markings.
Glossary of technical terms used in the manual.
Frequently asked questions and answers for common non-trouble issues.
Basic principles and knowledge related to refrigeration.
