Samsung AM022KNQDEH/TK - Using the Goodsleep Function

21
English
Advanced Operation
When the air conditioner is operating in Cool mode;
1. Press the button to select .
• The ( ) indicator will keep blinking and you can set the time.
2. Press the or button to set the time.
• You can set the time in half hour intervals from 30minutes
(0.5 on the display) to 3 hours and in hour intervals from 3 to 12
hours.
• The time can be set from minimum 30minutes to maximum
12hours.
• The default time value for the good'sleep mode is 8hours.
3. Press the button to complete the good'sleep mode
setting.
• The ( ) indicator and the set time of the good'sleep mode will
be displayed on the remote control display.
• The good'sleep mode will be cancelled if you don't press the
button within 10seconds after setting the time. Therefore, check
for the ( ) indicator on the remote control display.
Cancel
Press the button ▶ select ( ) ▶ press
the or button ▶ set the timer to ▶
press the button
Remote control display
Additional options available in good'sleep mode
The temperature can be adjusted by 1°C (1°F) within the range of
18°C (65°F) to 30°C (86°F).
Using the good’sleep Function