What to do if my Samsung AM028FNNDEH/EU Air Conditioner does not work?
If your Samsung Air Conditioner isn't working, try these steps: Ensure the power plug is correctly connected to the wall socket. Check if the circuit breaker is switched on and also check your fuse to make sure it is not blown. Finally, check if there is a power failure.
Why is my Samsung AM028FNNDEH/EU remote control not working?
If your Samsung Air Conditioner remote control isn't working, here are a few things to check: First, ensure your batteries aren't depleted and are correctly installed. Also, make sure nothing is blocking the remote control sensor. Finally, strong light from fluorescent bulbs or neon signs near the air conditioner may interrupt the electric waves.
Why is no cool air coming from my Samsung Air Conditioner?
If cool air isn't coming from your Samsung Air Conditioner, consider the following: Check if the set temperature is higher than the current temperature, and adjust it by pressing the Temperature button on the remote control. Ensure the air filter isn't blocked by dirt. If the unit was just turned on, wait 3 minutes. Also, make sure that the air conditioner is not installed in a place with direct exposure to sunlight, and that there is no cover or obstacle near the outdoor unit. Check if the refrigerant pipe is too long and also check if the air conditioner or the remote control is only available in Cool mode.
Why is water dripping from the blades of my Samsung Air Conditioner?
If water is dripping from the air low blades of your Samsung Air Conditioner, it may be because the unit has been cooling for an extended period with the blades pointed downwards. This can cause condensation due to temperature differences.
How to fix Samsung AM028FNNDEH/EU Air Conditioner temperature that doesn't change?
If the temperature on your Samsung Air Conditioner isn't changing, check if you've selected Fan mode. If so, press the Mode button on the remote control to select a different mode.
What to do if my Samsung AM028FNNDEH/EU doesn't turn on/off with the wired remote?
If your Samsung Air Conditioner isn't turning on or off with the wired remote control, check if you have set the wired remote control for group control.
Why does the fan speed not change on my Samsung Air Conditioner?
If the fan speed on your Samsung Air Conditioner isn't changing, it might be because you've selected Auto or Dry mode. In these modes, the air conditioner automatically adjusts the fan speed.
What to do if odors permeate the room when operating my Samsung AM028FNNDEH/EU Air Conditioner?
If odors permeate the room when your Samsung Air Conditioner is running, it could be due to the appliance operating in a smoky area or smells entering from outside. Try operating the air conditioner in Fan mode or open the windows to air out the room.
Why doesn't my Samsung AM028FNNDEH/EU operate immediately after restarting?
Your Samsung Air Conditioner will start in 3 minutes due to its protective mechanism.
Why does my Samsung AM028FNNDEH/EU Air Conditioner make a bubbling sound?
A bubbling sound may occur when the refrigerant is circulating through the compressor; in this case, let the air conditioner operate in a selected mode. Also, when you press the Power button on the remote control, noise may be heard from the drain pump inside the air conditioner.
General| Outdoor Unit Noise Level | 50 dB |
|---|---|
| Refrigerant | R32 |
| Power Supply | 220-240 V, 50 Hz |
| Cooling Capacity | 2800 W |
| EER | 3.5 |
| Energy Efficiency Ratio (EER) | 3.5 |
| Noise Level (Indoor) | 40 dB |
| Indoor Unit Noise Level | 40 dB |
| Operating Temperature (Cooling) | 46 °C |
Experience comfort during hot summer days with your new air conditioner.
Utilize the advanced heat pump system for efficient year-round heating and cooling.
Enhance your space with the air conditioner's aesthetically pleasing and complementary design.
Ideal for business and commercial spaces, offering flexible air distribution and remote control.
Understand critical symbols and general safety guidelines for safe operation.
Essential safety instructions for proper and secure installation of the unit.
Critical precautions regarding electrical connections and power usage.
Important safety measures to follow during the operation of the air conditioner.
Safety instructions for cleaning the unit to prevent damage or hazards.
Temperature and humidity ranges for efficient air conditioner operation.
Overview of the unit's internal protections for reliable performance.
Advice for optimal cooling and heating performance.
Understanding and managing frost formation and de-icing cycles.
Guidance on fan speed and temperature settings for comfort.
How the unit behaves during power outages and its protection features.
Identification of the primary parts of the air conditioner unit.
Explanation of indicator lights and sensor functions for monitoring status.
Instructions for cleaning the external surfaces of the unit safely.
Technical specifications including dimensions and net weight of indoor units.
Step-by-step guide for cleaning the air filter and front grille.
Recommended checks and cleaning schedule for long-term performance.
Solutions for issues like the unit not starting immediately or not working at all.
Troubleshooting steps for problems with temperature control and air delivery.
Guidance for resolving problems with the remote control and display indicators.
Solutions for unusual odors, sounds, or water dripping from the unit.
Detailed steps for correctly installing the indoor unit.
Procedures for performing leak tests and applying insulation during installation.
Guidelines for installing the drain pipe and ensuring proper water drainage.
Instructions for connecting refrigerant pipes, drain hoses, and electrical wiring.
Step-by-step guide to enter and manage unit setting options via remote control.
Instructions for assigning a unique address to the indoor unit for network communication.
Configuration of specific installation settings for the 02 series models.
Configuration of specific installation settings for the 05 series models.
Supplementary details and logic for specific configuration settings.
To Next Page