EasyManua.ls Logo

Samsung AM028NNNDEH Series - User Manual

Samsung AM028NNNDEH Series
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Air conditioner
User manual
AM***NNN*EH***
Thank you for purchasing this Samsung air conditioner.
Before operating this unit, please read this user manual carefully and retain it for future reference.

Other manuals for Samsung AM028NNNDEH Series

Questions and Answers

  • L
    Lauren BatesAug 16, 2025
    Why is my Samsung AM028NNNDEH not cool enough?
    • W
      welchstephanieAug 16, 2025
      If your Samsung Air Conditioner isn't cooling effectively, it might be due to several reasons. In Cool mode, ensure the set temperature is lower than the current room temperature by repeatedly pressing the Temperature button until it's set to at least 18°C. Also, make sure it's not in Fan mode, which doesn't provide cooling or heating. Check the air filter for blockages and clear any obstructions around the outdoor unit. For optimal performance, ensure the outdoor unit is in a well-ventilated area, shielded from direct sunlight, and the indoor unit isn't exposed to direct sunlight either.
  • H
    Holly WellsAug 19, 2025
    What to do if my Samsung AM028NNNDEH Air Conditioner does not turn on?
    • J
      Jacqueline MckayAug 19, 2025
      If your Samsung Air Conditioner isn't turning on, first ensure the power plug is properly connected. Next, check if the auxiliary power switch (MCCB, ELB) is turned on. If it’s off, the unit won’t work even if you press the Power button. If the air conditioner hasn't been used for a while, turn on the auxiliary power switch (MCCB, ELB) 6 hours before starting it. Also, if the air conditioner was turned off by the Timed off function, press the Power button to turn it back on.
  • J
    Jennifer MatthewsAug 21, 2025
    Why isn't my Samsung AM028NNNDEH Air Conditioner remote working?
    • B
      Beth AustinAug 21, 2025
      If your Samsung Air Conditioner remote isn't working, start by checking if the batteries are discharged and replace them if needed. Ensure nothing is blocking the remote control sensor on the air conditioner unit. Also, check for any strong lighting sources near the air conditioner, as they can interfere with the remote's signal.
  • P
    Paula RamirezAug 25, 2025
    What to do if the Samsung Air Conditioner indoor unit display is blinking?
    • L
      liumichaelAug 26, 2025
      If the indoor unit display of your Samsung Air Conditioner is blinking continuously, try turning the air conditioner on again by pressing the Power button. If that doesn't work, turn off and then turn on the auxiliary power switch, and then turn the air conditioner back on.
  • R
    Ronald PalmerAug 27, 2025
    How to fix the Timed on/off function on my Samsung AM028NNNDEH Air Conditioner?
    • M
      Michael MontgomeryAug 28, 2025
      If the Timed on/off function on your Samsung Air Conditioner isn't working, make sure you pressed the SET button on the remote control after setting the on/off time.
  • D
    dawnclaytonAug 30, 2025
    Why is my Samsung Air Conditioner not blowing warm air?
    • C
      Curtis FernandezAug 30, 2025
      If your Samsung Air Conditioner isn't blowing warm air, first check if the outdoor unit is designed for cooling only. If so, it won't produce warm air even in Heat mode. Also, verify that the remote control supports both cooling and heating; if it doesn't, use a remote control that does.
  • S
    Samantha WrightSep 3, 2025
    What to do if the wired remote control of Samsung AM028NNNDEH does not operate?
    • R
      robert24Sep 3, 2025
      If the wired remote control of your Samsung Air Conditioner isn't working, check whether the indicator is displayed at the bottom right of the remote control display. If the indicator is not displayed, turn off both the air conditioner and the auxiliary power switch, and then contact a service centre.
  • C
    cgardnerSep 5, 2025
    Why doesn't my Samsung AM028NNNDEH Air Conditioner turn on right away after restarting?
    • P
      Pamela PattersonSep 5, 2025
      Your Samsung Air Conditioner has a protective mechanism to prevent overloading. Because of this, the air conditioner will start in 3 minutes.
  • S
    Samuel CookeSep 9, 2025
    Why can't I change the fan speed on my Samsung AM028NNNDEH Air Conditioner?
    • C
      catherineparkerSep 9, 2025
      If you cannot change the fan speed on your Samsung Air Conditioner, check whether the Auto or Dry mode is currently running.
  • K
    Katherine HobbsSep 12, 2025
    Why doesn't my Samsung AM028NNNDEH Air Conditioner turn on/off immediately with the wired remote?
    • C
      Cathy ChavezSep 12, 2025
      If your Samsung Air Conditioner isn't responding immediately to the wired remote control, check whether the wired remote control is set for group control.

Summary

At a Glance

Operation Features

Troubleshooting

Remote Control and Display Issues

Technical specifications

Installation Procedure

Step 1 Installing the indoor unit

Detailed steps for mounting the indoor unit securely.

Step 2 Performing the gas leak test

Procedures for testing the system for gas leaks.

Step 4 Installing the drain hose and drain pipe

Steps for correctly installing the drain hose and pipe.

Step 5 Connecting the power and communication cables

Wiring instructions for power and communication cables.

Step 6 Setting the indoor unit addresses and installation options

How to set unit addresses and customize installation options.

Setting the option values (Part 1)

Steps for setting specific installation option values via remote.

Setting the option values (Part 2)

Continues setting installation option values via remote control.

Setting the option values (Part 3)

Further steps for setting installation options for cooling modes.

Setting the option values (Part 4)

Steps for setting installation options for heating and auto modes.

Setting the option values (Part 5)

Steps for setting installation options for dry and fan modes.

Setting the option values (Part 6)

Final steps for setting installation options and saving them.

Setting the indoor unit addresses (MAIN;RMC;MCU)

Option No. for an indoor unit address

Table detailing option numbers for indoor unit addresses.

Setting the indoor unit installation option

Installation options for the 02 series

02 series installation option (Detailed)

Installation options for the 05 series

05 series installation option (Detailed)

Changing the addresses and options individually

Samsung AM028NNNDEH Series Specifications

General IconGeneral
BrandSamsung
ModelAM028NNNDEH Series
CategoryAir Conditioner
LanguageEnglish

Related product manuals