Samsung AM032MNQDCH/AA - Page 188

Disassembly and Reassembly
3-128 Samsung Electronics
No Parts Procedure Remark
4) Loosen the EVA IN/OUT connector.
(CN403)
When you separate the connector,
pull pressing the locking button.
5) Loosen the Humidity sensor
connector(CN401). → Option connector.
The terminal is locking type. So, when
you separate terminals, pull pressing
the button.
6)
Loosen the DISPLAY connector. (CN501).
The terminal is locking type.
So, when you separate terminals, pull
pressing the button.
7)
Loosen the POWER connector.
When you separate the connector,
pull pressing the locking button.