3-110 Samsung Electronics
No Parts Procedure Remark
1) Disassembl the connection wire to take the
motor fan out.
2) Diassemble The Cabi Fan Bottom.
- Unscrew 9 screws.
3) Disassemble the Link Screw.
- Unscrew 3 screws
4) Disassemble 2 Case blower bottom.
- Unscrew 4 screws
5) Disassemble Bracket Motor and Motor.
- Unscrew 4 screws
6) After disassemble the Motor and Blower for
the set, disassemble the Blower by use of
3mm wrench.
To Next Page
Loading...
