Why is my Samsung AM036JNCDCH showing a communication error between the indoor and outdoor units?
A communication error between the indoor and outdoor units of your Samsung Air Conditioner might occur due to a pre-tracking failure, or because the actual number of indoor units differs from the quantity setting on the outdoor unit. To resolve this, verify the number of indoor units and the outdoor unit settings.
What to do if my Samsung Air Conditioner shows a reverse phase or open phase error?
If your Samsung Air Conditioner indicates a reverse phase or open phase error, check the electrical supply phases to ensure they are correctly configured.
How to fix an indoor fan error on a Samsung Air Conditioner?
To address an indoor fan error on your Samsung Air Conditioner, inspect the indoor fan for any faults. If necessary, replace the fan.
What does it mean when my Samsung AM036JNCDCH displays an error on the outdoor temperature sensor?
An error on the outdoor temperature sensor of your Samsung Air Conditioner indicates a potential issue with the sensor itself, such as a short or open circuit. Inspect the outdoor temperature sensor and replace it if necessary.
What should I do if my Samsung Air Conditioner has a communication error after tracking is completed?
If your Samsung Air Conditioner shows a communication error between the indoor and outdoor units after tracking, check the communication status between the units to identify any issues.
How do I troubleshoot a room temperature sensor error on my Samsung Air Conditioner?
If your Samsung Air Conditioner displays an error related to the room temperature sensor of the indoor unit, it may be shorted or open. Inspect the room temperature sensor and replace it if needed.
What to do if my Samsung AM036JNCDCH displays an error on the current sensor?
If your Samsung Air Conditioner shows an error on the current sensor, it might be shorted or open. Inspect the current sensor and replace it if necessary.
How to resolve a blockage detected on the high pressure pipe of my Samsung AM036JNCDCH Air Conditioner?
If a blockage is detected on the high-pressure pipe of your Samsung Air Conditioner, inspect the pipe for any obstructions and clear them if necessary.
What does an error on the EVA IN sensor mean for my Samsung Air Conditioner?
An error on the EVA IN sensor of the indoor unit in your Samsung Air Conditioner suggests a problem with the sensor, such as a short or open circuit. Check the EVA IN sensor and replace it if required.
What should I do if my Samsung AM036JNCDCH displays an error on the EVA OUT sensor?
If your Samsung Air Conditioner displays an error on the EVA OUT sensor of the indoor unit, it indicates a potential issue like a short or open circuit. Inspect the EVA OUT sensor and replace it if necessary.
General| Type | Split System |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Operating Temperature (Cooling) | 16 ~ 46 °C |
| Cooling Capacity | 36000 BTU/h |
| Refrigerant | R410A |
| Indoor Unit Net Weight | 26.5 lbs |
To Next Page