4
Selecting the installation location
Accessories
f The following accessories are supplied with the indoor unit.
The type and quantity may dier depending on the specications.
Pattern sheet (2) Insulation cover pipe A (1) Insulation cover pipe B (1) Insulation drain (1) Flexible hose clamp (1)
Flexible hose (1) Cable-tie (8) User manual (1) Install manual (1)
Indoor Unit
f Select a convenient location that permits the air to reach every corner of the area to be cooled.
f Pre-plan for easy and short routing of the refrigerant tubing and wiring to the outdoor unit.
f There should be no ammable gas, alkaline, substances present in the air.
f Avoid location where obstacles preventing good air circulation are present.
f Noise prevention should be considered in determining the unit's location.
f The structure, where the unit is to be installed should be strong enough to support the weight of the unit.
f Rigid wall without vibration.
f Where it is not exposed to direct sunshine.
f Where the air lter can be removed and cleaned easily.
Space Requirements for Indoor Unit
Ceiling installation
11.81inch(300mm)
1.97inch
(50mm)
Ceiling Ceiling
Wall Wall
1.97inch(50mm)
11.81inch(300mm) or more
11.81inch(300mm) or more
To Next Page
Loading...
