10
English
Cleaning and Maintenance
Before cleaning the indoor unit, be sure to turn off the auxiliary power switch.
Cleaning the indoor unit exterior
Wipe the surface of the indoor unit with a tepid
damp cloth.
Remove the dust accumulated in the narrow gaps
of the product with a soft brush.
CAUTION
• Do not use alkaline detergent, sulphuric acid,
hydrochloric acid, or organic solvents (such as
thinner, kerosene, and acetone) to clean the
surfaces.
• Do not attach any stickers on the surfaces
because this may cause damage.
• When you clean the heat exchanger on the
indoor unit, you need to disassemble the indoor
unit. Therefore, you must contact the local
service center for help.
Cleaning the outdoor unit heat exchanger
Spray water to clean the dust.
CAUTION
• The heat exchanger of the outdoor unit has
sharp edges. Take care when cleaning its
surface.
NOTE
• If it is difficult to clean the heat exchanger
of the outdoor unit, contact the local service
center.
Cleaning and Maintaining
Cleaning and Maintenance
DB68-11948A-02_IB_DVM 2way_TK_EN_.indd 10DB68-11948A-02_IB_DVM 2way_TK_EN_.indd 10 2023-03-28 오후 2:11:322023-03-28 오후 2:11:32
To Next Page
Loading...
Need help?
General
