Samsung AM056NNNDEH Series - Indoor Unit

Disassembly and Reassembly
Samsung Electronics
17
No Parts Procedure Remark
1 Panel 1) Pull two levers below Samsung logo to open
the grille.
2) Detach the safety clip and white link from the
panel.
3) Remove the 2 fixed screws to remove the
Control-Box Cover.(Use +Screw Driver)
4) Remove the 4 connector wires from the PBA.
(Remocon-Receiver, Blade motor and Humidity
sensor.)
5) Detach the 4 corners of the panel using both
hands.
3-1 Indoor Unit
■ AM045/056/071/090/112/128/140NN4DEH/**
AM009/012/018/024/036/048NN4DCH/**