9-12 Samsung Electronics
AN026JSKLKN 0 1 0 3 4 0 1 1 6 4 4 4 2 1 4 4 4 0 3 0 2 0 0 3
AN035JSKLKN 0 1 0 3 4 0 1 1 4 4 3 4 2 1 3 4 3 0 3 0 2 0 0 5
AN050JSKLKN 0 1 0 3 4 0 1 1 6 4 4 4 2 1 5 4 4 0 3 0 2 0 0 6
AN080JSKLKN 0 1 0 3 4 0 1 1 5 4 4 2 2 1 4 4 4 0 3 0 2 0 0 7
AN100JSKLKN 0 1 0 3 4 0 1 1 6 4 4 3 2 1 5 4 4 0 3 0 2 0 0 8
Error Mode
Option setting error
Display
E163
Check Method
Entering incorrect ERV option or entering no ERV option at all
Cause
Entering incorrect ERV option or entering no ERV option at all
Sensor SPEC.
9-4-10 Option Setting Error
ఐProgress re-input after reconfirming option by model attached below.
If you use a existing EEPROM after replace MAIN PBA, don't need to reset option.
To Next Page
Loading...
