Samsung AQ09A1VE - Quick Cooling;Heating; Changing Room Temperature Quickly (Turbo)

Connecting the Cables to the Outdoor Unit
One electric cable must be connected to the outdoor unit:
◆
The assembly cable connecting the indoor unit to the outdoor unit
1 Remove the terminal board cover on the side of the outdoor unit.
2 Connect the assembly cable to terminals.
➢ Each wire is labelled with the corresponding terminal number.
3 Connect the earth wires to the earth terminals.
➢ Refer to the page opposite for further details on how to check
that earthing is correct.
4 Replace the terminal board cover, carefully tightening the screw.
5 Connect the power cable with the indoor unit.
E-12
1(N) 2 3 4 5
A B C D
1 5432
A B CDE
Indoor unit
Outdoor unit
Earth
terminal
INSTALLING THE OUTDOOR UNIT
◗ SH✴✴YAA(B)
◗ SH✴✴YAA(B)
◗ The Others
◗ The Others
N1 1 2 3 E
N1 1 2 3
N1 E321
1 23E
N1
Indoor unit
Outdoor unit
Earth
terminal