Setting the On Timer
You can set the On Timer to turn on the air conditioner automatically at
the appointed time within a range of 30 minutes to 24 hours.
1
Press the button .
2
Press the or buttons until the desired time is displayed to set
the On Timer. You can set the time between 0.5 hour and 24 hours.
3
Press the button to complete the setting.
Result
:
The remaining time is displayed.
The timer indicator stops blinking.
The selected mode and the temperature on the display
disappear after 10 seconds.
The air conditioner turns on automatically at the appointed
time and the On Timer setting disappears.
4
Press the button until the desired mode is displayed at the top of
the remote control to select the mode in advance.
Result
:
The air conditioner operates in the selected mode when it is
turned on.
Note
The most recently used function is set between On and Off Timer
to turn on/off the air conditioner and Good Morning mode.
To Cancel the On Timer
1
Press the button to cancel the On Timer.
Note
If you press the button, both the On Timer and
the Off Timer are canceled.
To Next Page
Loading...
Need help?
General
