Unit
Specifications
and Features
Other Features
If the unit loses power, it will automatically
restart with the prior settings once power has
been restored.
When turning on your unit, the louver will
automatically resume its former angle.
• Refrigerant Leakage Detection
The indoor unit will automatically display “EC”
or “EL0C”or flash LEDS (model dependent )
when it detects refrigerant leakage.
The SLEEP function is used to decrease
energy use while you sleep (and don’t
need the same temperature settings to
stay comfortable). This function can only
be activated via remote control. And the
Sleep function is not available in FAN or
DRY mode.
Press the SLEEP button when you are
ready to go to sleep. When in COOL mode,
the unit will increase the temperature
by 1°C (2°F) after 1 hour, and will increase
an additional 1°C (2°F) after another hour.
Sleep Operation
•
Set
temperature
1hr
1hr
Keep
running
SLEEP Operation
Saving energy during sleep
Cool mode(+1 C/2 F) per hour
for the first two hours
Not all
the functions are available for the air
conditioner, please check the indoor display
and remote control of the unit you purchased.
The sleep feature will stop after 8 hours and
the system will keep running with final
situation.
• Auto-Restart
• Louver Angle Memory
Page 12
To Next Page
Loading...
