Need help?Do you have a question about the Samsung AR12HSFSJWKN and is the answer not in the manual?
General| Cooling Capacity | 12000 BTU/h |
|---|---|
| Energy Efficiency Class | A |
| Compressor Type | Rotary |
| Power Supply | 220-240V, 50Hz |
| Noise Level (Outdoor) | 50 dB |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Features | Sleep Mode |
Quickly cools room and adjusts fan speed/airflow for comfort.
Provides the strongest cooling or heating air output.
Spreads cool/warm air indirectly for comfortable experience.
Minimizes energy use when alone, reducing electricity consumption.
Allows easy filter removal for frequent cleaning, preventing dust entry.
Adjusts temperature, fan speed, and airflow for better sleep.
Product self-examines installation through trial operation.
Simple wall mounting and easy pipe/wire connection.
Symbols and guidelines for preventing injury or damage.
Warnings related to electrical wiring and professional installation.
Precautions for power wiring, grounding, and operating environment.
Warnings about flooding, smoke, gas leaks, and handling.
Safety guidelines for using the unit and cleaning it.
Warning about chemicals known to cause cancer and reproductive toxicity.
Recommended indoor/outdoor temperature and humidity ranges for efficient use.
Guidelines for upkeep and internal protection systems.
Verifies correct installation through the Smart Install function.
Identifies key components of the indoor unit and remote controller.
Explains the symbols and indicators on the remote controller display.
Details the purpose of each button on the remote controller.
Tips for cancelling settings and general usage advice.
Explains the icons shown on the remote controller display.
How to identify low battery and proper storage of the remote.
Details on Auto, Cool, Dry, Fan, and Heat modes.
Specific behaviors and limitations for each operating mode.
How to select modes and adjust desired temperature.
How to adjust fan speed for different operating modes.
How to control the vertical air flow blades.
How to control the horizontal air flow blades.
Notes on air flow adjustment availability in different modes.
Step-by-step guide to set the timer for turning the unit on.
Settings available when the On timer is active.
Step-by-step guide to set the timer for turning the unit off.
How to use both On and Off timers simultaneously.
Explanation of the three stages: Fall asleep, Sound sleep, Wake up.
How temperature and fan speed change during good'sleep mode.
Steps to enable the 2-Step Cooling function.
How to set the Fast function for quick cooling/heating.
Important notes and limitations of the Fast function.
How to set the Comfort function for mild cooling/heating.
Important notes and limitations of the Comfort function.
How to set the Single user function to reduce energy usage.
Available adjustments for temperature, fan speed, and air swing.
How to set the Quiet function to reduce noise.
Available adjustments and limitations for the Quiet function.
How to activate the function that produces positive ions.
Important notes regarding Virus Doctor function operation.
How to activate the function to minimize indoor unit moisture.
Notes on Auto clean function duration and indoor fan behavior.
Steps to mute or unmute the beep sound from the indoor unit.
How to check the electricity consumed by the air conditioner.
Steps to reset the filter reminder after cleaning.
How to adjust or turn off the display lighting.
Steps to set up WiFi and WPS for the Smart A/C app.
Instructions for cleaning the indoor unit components.
Instructions for cleaning the outdoor unit's heat exchanger.
Steps to remove the air filter from the main body.
How to clean and dry the air filter.
Instructions for putting the air filter back into place.
Chart of periodical checks for indoor and outdoor units.
Solutions for when the air conditioner does not operate at all.
Troubleshooting steps for when temperature adjustment isn't working.
Solutions for issues with cool or warm air output.
Troubleshooting steps for when air flow adjustment is not working.
Solutions for when fan speed adjustment is not working.
Troubleshooting steps for a non-working remote controller.
Solutions for when the timer function does not set.
Steps for blinking indicators, odors, errors, noise, smoke, and water.
Important information for installers regarding manual use and safety.
Precautions and guidelines for installing the air conditioner unit.
Factors for selecting the indoor unit installation location.
Requirements for power supply line, fuse, and circuit breaker.
Factors for selecting the outdoor unit installation location.
Places to avoid for unit malfunction.
Required spacing around the outdoor unit for optimal airflow and access.
List of accessories supplied with the indoor unit.
List of accessories supplied with the outdoor unit.
List of optional accessories for connecting the unit.
Tools needed for installation and testing operations.
Steps to decide drain hose path and drill holes for connection.
How to mount the indoor unit to a wall.
How to attach the hanger screw to the indoor unit.
Steps to remove the cover panel for indoor unit installation.
Steps for reassembling the indoor unit's bottom panel.
Details on wire types, AWG, and electrical connection precautions.
Steps for connecting the assembly cable to indoor/outdoor units.
Instructions for connecting cables to terminal boards and verification.
Steps for connecting copper pipes using flare connections and torque specs.
How to cut, prepare, flare pipes and check for correct edges.
Steps for flaring pipes and tightening torque.
Guidelines for routing and connecting the indoor drain hose.
How to check for proper drainage and install extension hoses.
Steps to change the direction of the drain hose outlet.
How to connect the drain hose to the outdoor unit.
Steps for evacuating air from pipes using a vacuum pump.
Connecting gauge and operating vacuum pump for evacuation.
Guidelines for adding refrigerant based on pipe length.
Procedure for charging refrigerant using a liquid pipe.
Procedure for leak testing using nitrogen gas.
Procedure for leak testing with refrigerant after opening valves.
Steps for pump-down before disconnecting refrigerant lines.
Final steps for installing the indoor unit onto the plate.
Guidelines for installing the outdoor unit on a stable base.
How to install the outdoor unit using a wall bracket.
How to initiate the Smart Install mode for checking installation status.
What happens during and after the Smart Install mode.
Common error codes and measures for installers.
Checks and steps to perform before and during trial operation.
Steps for pump-down when removing the product.
Detailed instructions for extending the power wiring with diagrams.
How to install the optional Sub PCB for enhanced control.
Parts list and wiring diagram for installing the wired remote controller.
To Next Page