To Next PageTo Next Page
Need help?Do you have a question about the Samsung AR12HSFSJWKNCV and is the answer not in the manual?
General| Cooling Capacity (Ton) | 1 Ton |
|---|---|
| Energy Efficiency Ratio (EER) | 3.21 W/W |
| Star Rating | 3 Star |
| Compressor Type | Rotary |
| Outdoor Unit Noise Level | 50 dB |
| Power Supply | 220-240V, 50Hz |
| Type | Split |
| Cooling Capacity | 12000 BTU/h |
| Indoor Unit Dimensions (WxHxD) | 285 mm |
| Outdoor Unit Dimensions (WxHxD) | 720 mm |
| Features | Auto Clean, Sleep Mode, Dehumidification |
Detailed diagram of the indoor unit's Printed Circuit Board (PCB) with connector pinouts.
Diagram of the outdoor unit's PCB for 9K/12K models, showing component locations and connector pinouts.
Illustrates correct and incorrect methods for connecting ring terminals to indoor unit terminal blocks.
Identifies and labels the main parts of the indoor unit and its display components.
Explains the buttons and display indicators on the wireless remote controller for various functions.
Lists basic checks for voltage, wiring, and operational symptoms before diagnosing faults.
Guides on diagnosing and resolving communication errors between indoor and outdoor units via LED displays.
Provides pre-inspection notices and detailed methods for inspecting indoor and outdoor PCBs.
Illustrates the functional blocks and signal flow within the indoor unit's controller system.
Shows the interconnected components and signal paths within the outdoor unit's inverter and SMPS PBA.
Provides pressure distribution charts based on indoor and outdoor temperature variations.
Tabulates performance data including capacity, pressure, and conversion marks.
Addresses frequently asked questions about non-trouble issues like weak cooling, smells, and operation stops.
Details the procedure for removing, cleaning, and re-inserting the air filter for optimal performance.
Outlines steps for installation, including location, wall drilling, pipe spooling, leak testing, and electrical work.
Illustrates the process of connecting pipes, purging air, and checking for leaks during installation.
