10-12 Samsung Electronics
10-2-11 Compressor starting error
Indoor display
3-LED DISPLAY
7-SEG DISPLAY
DESCRIPTION
LED1 LED2 LED3
E461 Comp starting error
Outdoor display
Comp starting error
LED ON LED BLINKING LED OFF
1. Checklist :
1) Is the connection of cable for the compressor?
2) Is the compr essor wire is connected clockwise? U(RED)-V(BLU)-W(YEL)
3) Is the interphase resistance of compressor normal?
2. Troubleshooting procedure
Restart after power o.
Download the EEPROM data
Exchange the compressor
Is the resta rt error occurred again?
Is the connection of compressor wireisnormal?
Is the resta rt error occurred again?
Isthecompressor bodyand interphase
resistance insulated?
NO
NO
NO
NO
Terminate the service
Connect the compwire normally
Terminate the service
Ex change the Outdoor PBA
YES
YES
YES
YES