Samsung AR36BSHUMGMXCV - Page 13

Disassembly and Reassembly
Samsung Electronics 3-5
No Parts Procedure Remark
4PBA
3) Loosen the EVA IN/OUT connector. (CN403)
AɇЇϩͱ
When you separate the connector,
pull pressing the locking button.
4) Loosen the Humidity sensor connector
(CN401).
ĮΧϩͱʀͱʪʀϩͱθࢋ
AɇЇϩͱ
The terminal is locking type.
So, when you separate terminals, pull
pressing the button.
5) Loosen the DISPLAY connector.
(CN501).
AɇЇϩͱ
The terminal is locking type.
So, when you separate terminals, pull
pressing the button.
6) Loosen the POWER connector.
AɇЇϩͱ
When you separate the connector,
pull pressing the locking button.