Disassembly and Reassembly
3-10 Samsung Electronics
No. Parts Procedure Remark
4
Outdoor Unit Guard
1) Pull out the sensor from the Outdoor
Unit Guard and separate it.
2) Remove the 4 screws which is fixed
to Outdoor Unit Guard and separate
it. (Use + Screw Driver)
5
Cabinet Rear RH
1) Pull out the sensor from the Cabinet
Rear RH and separate it.
2) Remove the 4 screws which is fixed
to each side of Cabinet Rear RH and
separate it. (Use + Screw Driver)
To Next Page
Loading...
