3-8
Samsung Electronics
3-2-2(e) Outdoor unit installation
Operating Instructions and Installation
1. Remove the cover-E parts.
2. Firmly connect the cable connector in the terminal block.
3. Fasten the M4 ring terminal to the hole marked
4. Firmly fix the ass'y cable with clamp wire holder.
5. Assemble the cover-E parts.
6. To prevent the entry of water, form a trap of the ass'y cable as illustrated in the installation dia-
gram of indoor and outdoor unit.
Wiring connection
Cover-E parts
Screw
To Next Page
Loading...
