Why is my Samsung Air Conditioner remote not working?
If your Samsung Air Conditioner remote is not working, check if the batteries are depleted. Also, make sure nothing is blocking the remote controller sensor. Strong light may also affect the remote control operation, so check that there are no strong lighting apparatus near the air conditioner.
What to do if my Samsung Air Conditioner is not working?
If your Samsung Air Conditioner isn't working, first check the power status and try operating it again. Then, ensure that the unit is properly plugged in or that the circuit breaker is switched on. Finally, check if you have set the Timer. If so, operate the air conditioner again by pressing the Power button.
Why can't I adjust the temperature on my Samsung AS09E Air Conditioner?
If you cannot adjust the temperature on your Samsung Air Conditioner, it might be because you have selected Fan or Turbo mode. In these modes, the desired temperature is set to auto, and you cannot manually adjust it.
Why can't I adjust the fan speed on my Samsung AS09E Air Conditioner?
If you cannot adjust the fan speed on your Samsung Air Conditioner, it might be because you have selected Auto, Dry, or Turbo mode. In these modes, the fan speed is automatically set, and you cannot adjust it manually.
Why does my Samsung AS09E smell?
If odors permeate the room when your Samsung Air Conditioner is running, it could be operating in a smoky area. Ventilate the room or operate the air conditioner in Fan mode for 1~2 hours. (We do not use smelly components in the air conditioner.)
What is the smoke coming from my Samsung Air Conditioner outdoor unit?
The 'smoke' coming from your Samsung Air Conditioner's outdoor unit might not be a concern. It could be steam generated by the defrost operation from the outdoor heat exchanger during Heat mode in winter.
Why is my Samsung Air Conditioner not blowing cold air?
There are several reasons why your Samsung Air Conditioner might not be blowing cold air. First, check if the set temperature is higher than the current temperature during Cool mode. If it is, adjust the temperature using the Temp + or - button on the remote. Also, ensure that the air vents are not blocked by dust. Clean them frequently to maintain cooling performance. Make sure that the outdoor unit isn't covered or obstructed. Remove any covers or obstacles. Confirm that the doors and windows are closed, as open doors and windows can reduce cooling performance. Check to see if you have selected Auto/Dry mode, as desired temperature is set to auto and you cannot adjust the temperature in these modes. Finally, it may be running in De-ice mode, in which case the indoor fan stops and cool ai...
General| Type | Split System |
|---|---|
| Cooling Capacity | 9000 BTU/h |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Operating Temperature (Cooling) | 18-43°C |
| Air Flow (High) | 500 m³/h |
| Noise Level (Indoor) | 38 dB(A) |
| Net Weight (Indoor) | 8 kg |
| Energy Efficiency Ratio (EER) | 3.21 W/W |
| Coefficient of Performance (COP) | 3.61 W/W |
| Heating Capacity | 9000 BTU/h |
To Next Page
