ENGLISH
13
For a comfortable sleep, the air conditioner will operate it Fall asleep w Sound sleep w Wake up from mode.
1. Press the button on the remote controller.
u
controller display.
2. Press the button to set the time.
u
You can set the time in half hourly unit from 30 minutes ~ 3 hours and hour unit from
3 hours ~ 12 hours.
u
Operating hour can be set from minimum 30 minutes to maximum
12 hours.
u
Default operation hour is set to 8 hours.
3. Press the Set/Cancel button to active it on.
u
Then the air conditioner operates in good’sleep(Cool) mode.
u
If you don’t press Set/Cancel button within 10 seconds after pressing the
the air conditioner will return to previous status.
Check
indicator on the indoor unit.
t Set timer in mode over 5 hours. You fell disturbed sleep if the is set too short or long
because the default is set to 8-hour-operation.
t If the
mode is set less than 4 hours, the operation will stop at the same time.
If the
mode is set over 5 hours, it will run as Wake up stage from the last one hour before it stops.
t Recommended set temperature is between 25˚C~27˚C for cooling and 21˚C~23˚C for heating.
Temperature and fan speed changes in mode
t Fall asleep: Eases you into sleep by dropping the temperature.
t Sound sleep: Relaxes your body and raises your temperature slightly.
t Wake up from
mode: Allows you to wake up from comfortable intermittent air and it makes you feel
refreshed.
When the air conditioner is on and in cool/heat mode
You can set the desired temperature by 1˚C in the range of 16˚C~30˚C.
Fan speed will be adjusted automatically according to the
mode.
mode.
Press the Set/Cancel button once again.Cancel
mode
However, If you select mode while heating operation is on,
you can adjust fan speed.
However, If you select mode while heating operation is on,
To Next Page
Loading...
