E-
18
Airing Your Room
If the atmosphere in your room is stale, you can air the room using
the Fan feature.
1 If necessary, press the (On/Off) button.
Result:
2 If the is not displayed at the top of the remote control,
press the button on the remote control one or more times until it
appears.
Result:
The unit beeps each time you press the button.
The air conditioner runs in the Fan mode.
The temperature is set automatically.
You can change modes at any time.
3 Select the fan speed by pressing the button one or more times
until the required setting is displayed:
Low
Medium
High
Result
: Each time you press the button, the unit beeps.
4 To control the direction of the air flow, refer to page 24.
The air conditioner starts up in the Cool mode.
The unit beeps.
To Next Page
Loading...
