Cooling Your Room
To control the direction of the air flow, refer to page 9.3
Turn the operating mode selection dial and set it to “ HI COOL ” ,
“ MED COOL ” or “ LOW COOL ”.
Result:
◆ The air conditioner starts up in cool mode.
➢ ◆ You can change modes at any time.
Turn the THERMOSTAT control to the desired position.
You must select the COOL mode if you wish to adjust the:
◆ Cooling temperature
◆ Fan speed when Cooling
1
2
Possible temperatures: Can be set between 18°C and 29°C.
Result: The air conditioner starts cooling, if the room temperature is
higher than the selected temperature.
E-6
27˚C ~ 23˚C
23˚C
~ 18˚C
29˚C
~ 27˚C
AW05MOYEA_E/O_08574 12/12/02 4:24 PM Page 6
To Next Page
Loading...