Problem Explanation/Solution
The air conditioner does not
operate at all
Check for a power failure.
Check the voltage.
(See the technical specifications).
Check the power plug for disconnection.
Check to see whether the Power Control selector is placed in
the "OFF" position. (Set it to the desired position).
Check to see whether the room temperature is too low.
- Refer to page 8 for details about temperature condition.
The air comes out smoothly,
but cooling is not effective.
Set the THERMOSTAT dial to the desired position.
-When the number on the THERMOSTAT dial is too high,
the room temperature may be too warm.
Check to see whether there is an open window or other leakage of cool
air to the outside.
- Close the window and fill the gap.
Check to see whether there is any obstacle adversely affecting the flow
of air inside and outside the room.
- Remove the obstacle or change the position of the air conditioner.
Check to see whether the air filter is clogged with dust or contaminated
with foreign substances.
-Clean the air filter.
Check to see whether there is any direct sunlight facing the air
conditioner.
-Block the sunlight with a sunshade.
Check to see whether there is any electric device generating heat.
-Do not use the air conditioner together with any heating device.
Odors are permeating the
room during air conditioning
Ventilate the room.
Before contacting an Samsung authorized service center, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
To Next Page
Loading...
