Samsung AW078AA - Page 11

3-4 Samsung Electronics
Installation and Operating Instructions
Key operational function
POWER Operation start and stop
*
First ON = operation start, second ON = operation stop
- Selected as "OFF –> COOL or FAN". (DEFAULT=OFF)
*
Continuous operation is not available.
Mode Operation mode change
*
at every ON
- Selected as "COOL –> FAN". (Default=COOL)
*
If operation is OFF, it is considered as an invalid key.
*
Continuous operation is not available.
Fan speed Fan motor speed setting
*
at every ON
- Selected as “HIGH
→ MED → LOW → HIGH”. (DEFAULT=HIGH)
Temperature Currently displayed set temperature increase/decrease
(▲ ▼)
*
At every pressing, the set temperature is changed by 1˚C
(increase(▲) : 18˚C → 19˚C → ... → 29˚C → 30˚C)
(decrease(▼) : 24˚C → 23˚C → ... → 17˚C → 18˚C)
*
In case of the set temperature of 30˚C, when the “increase” key is pressed
temperature does not increase any more.
*
In case of the set temperature of 18˚C, when the “decrease” key is pressed
temperature does not decrease any more.
*
In case of above situation, when “increase/decrease“ key is pressed by remocon,
warning sound is generated.
*
If operation is OFF, it is considered as an invalid key.
*
In case of “FAN” mode operation, it is considered as an invalid key.
*
Continuous operation is available.
Circulaire Circulaire motor operation and stop
*
Once ON=Circulaire motor operation. Another ON-Circulaire motor stop.
*
Continuous operation is not available.
*
In case of operation stop, when the fan motor is turned off it is considered as an invalid key.
Timer Setting the on/off timer
(ON/OFF)
*
Can set “OFF TIMER HOUR“ if set is operation
*
Can set “ON TIMER HOUR“ if set is not operation
*
Once ON = standby setting TIMER : “– –“ displayed
*
In case of key pressing in status of standby setting ON/OFF TIMER
(––Hr → 1Hr → 2Hr → ... –> 23Hr → 24Hr)
*
If press TIMER key countinuosly operate such the lower part
(––Hr → 1Hr → 2Hr → ... → 24Hr → --Hr)
*
Continuous operation is available.
Sleep SLEEP mode on and off
*
Once ON=SLEEP mode on, Another ON=SLEEP mode off
• Continuous operation is not abailable
• Operation off, on timer Operation, save operation , not key operation
*
Not SLEEP operation is FAN mode
Energy Saver Power save mode on and off
*
Once ON=Power save mode on, Another ON=Power save mode off
*
Continuous operation is not available.
*
If operation is OFF, it is considered as an invalid key.
3-2-7 Panel key operation
Key discription
Key name
DB98-04511A(1)-1 3/20/02 2:23 PM Page 3-4