Disassembly and Reassembly
Samsung Electronics 4-10
No. Part name Procedures Remarks
^
&
*
Blower
Propeller Fan
Motor Supporte &
Motor
1. Loosen the hexagon nut, and remove
the blower.
1. Remove two screws on the bottom
side, and 5 screws on the case cond.
2. Loosen the hexagon nut, and remove
the fan
1. Remove four hexagon nuts on the base
pan.
2. Move the motor - assembly toward the
condenser, and lift up the motor -
assembly from the frame.
3. Remove the clips on both sides carefully
using the (-) driver.
DB68-02477A(2)-1 3/20/02 1:41 PM Page 3-17
To Next Page
Loading...