Samsung C27F396FHU - Removing the Stand (C22 F390 FH*; C22 F392 FH*; C24 F390 FH*; C24 F392 FH*; C24 F394 FH*; C24 F399 FH*; C27 F390 FH*; C27 F391 FH*; C32 F391 FW*)

21
1
Place the protective Styrofoam (cushion) included in
the package on the floor and place the product facing
down on the Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick sitting mat.
While holding the monitor with one hand, pull the
stand neck with your other hand to in detach the stand
as shown in the figure.
2
Turn the connecting screw at the bottom of the stand
base to separate it.
3
Remove the stand neck from the stand base by pulling
it in the direction of the arrow as shown in the figure.
- Caution
Do not press down on the monitor. There is a risk of
damaging the monitor.
Removing the Stand (C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* /
C27F390FH* / C27F391FH* / C32F391FW*)
―
Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
―
The exterior may differ depending on the product.