16
Connecting the Power
HDMI IN DP IN SERVICE
DC 19V
2
1
Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 19V port
on the back of the product.
2
Next, connect the power cable to the power outlet.
3
Press the JOG button at the bottom of the product to turn it on.
―
The input voltage is switched automatically.
Tidying Up the Connected Cables
1
2
Connect the corresponding cables. Put both cables in the cable holder on the stand
(HOLDER-STAND CABLE) to organise the cables,
as shown in the figure. Assembly is complete.
To Next Page
Loading...
