Samsung CE1071 - Oven Components and Accessories; Oven Internal and External Components; Microwave Oven Accessory Guide

4
EN
Oven Accessories
Depending on the model that you have purchased, you are supplied with
several accessories that can be used in a variety of ways.
VENTILATION HOLES
DOOR LATCHES
DOOR
TURNTABLE
COUPLER
ROLLER RING
SAFETY
INTERLOCK
HOLES
VENTILATION
HOLES
HEATING
ELEMENT
CONTROL PANEL
DOOR
HANDLE
WATER BOWL
HOLDER
1. Coupler , to be placed correctly over the motor shaft in the
base of the oven.
Purpose: The coupler rotates the turntable.
2. Roller ring, to be placed in the center of the oven.
Purpose:
The roller ring supports the turntable.
3. turntable, to be placed on the roller ring with the center
fitting on to the coupler.
Purpose:
The turntable serves as the main cooking
surface; it can be easily removed for cleaning.
4. Metal racks (High rack, Low rack), to be placed on the
turntable.
Purpose:
The metal racks can be used to cook two
dishes at the same time. A small dish may be
placed on the turntable and a second dish on
the rack. The metal racks can be used in
grill, convection and combination cooking.
5. Clean water bowl,
to be placed in the right side of the oven.
(only CE1071A / CE1071AT)
Purpose: The water bowl can be used to clean.
6. Crust plate
, to be placed on the turntable. (only CE1071AT)
Purpose: The crust plate is used to brown botton of
food by using the microwave or grill
combination cooking modes and to keep
pastry and pizza dough crispy.
jlXW^Xhl|TWZZ[ZuluUGGwG[GG{SGqGYYSGYWW_GG\aZXGwt