To Next PageTo Next PageWhy does my Samsung Microwave Oven program but the timer won't start?
If your Samsung Microwave Oven can be programmed but the timer does not start, it could be due to open or loose wiring of the secondary interlock switch, off-alignment of the primary interlock, or a defective secondary interlock switch. Adjust the door and interlock switches.
Why does my Samsung CE945G Microwave Oven not accept key inputs?
If your Samsung Microwave Oven does not accept key input for programming, it could be due to the key input not being in sequence, an open or loose connection of the membrane keypad to the Ass'y PCB, a shorted or open membrane panel, or a defective Ass'y PCB. Refer to the operation procedure and consider replacing the PCB main.
How to fix a dead Samsung Microwave Oven with no display?
If your Samsung Microwave Oven is completely dead, the fuse is fine, there's no display, and it's not operating, the cause could be: * An open or loose lead wire harness. * An open thermal cutout (Magnetron). * An open low voltage transformer. * A defective Ass'y PCB. Check the fan motor when the thermal cutout is defective. Check Ass'y PCB when LVT is defective.
What to do if my Samsung CE945G Microwave Oven timer starts but there is no heat?
If the timer on your Samsung Microwave Oven starts counting down but there's no microwave oscillation (no heat), even though the oven lamp and fan motor are on, it could be due to several reasons: * Off-alignment of latch switches * Open or loose connection of the high voltage circuit, especially the magnetron filament circuit * Defective high voltage components like the H.V. Transformer, H.V. Capacitor, H.V. Diode, H.V. Fuse, or Magnetron * Open or loose wiring of the power relay * Defective primary latch switch * Defective power relay or Ass'y PCB Adjust the door and latch switches. Check the high voltage components according to the component test procedure and replace them if defective. Consider replacing the PCB main.
What to do if my Samsung CE945G Microwave Oven stops during cooking?
If your Samsung Microwave Oven stops operating during cooking, it could be due to an open or loose wiring of the primary interlock switch or the operation of the thermal cutout (Magnetron). Adjust the door and latch switches.
How to fix a Samsung CE945G Microwave Oven when the turntable motor doesn't rotate?
If the turntable motor in your Samsung Microwave Oven does not rotate, it could be due to an open or loose wiring of the turntable motor or a defective turntable motor. Check the wire of the turntable motor and replace the turntable motor if necessary.
What to do if Samsung CE945G Microwave Oven timer counts down but no heat?
If the timer on your Samsung Microwave Oven counts down but there's no heat, even though the lamp and fan are working, here's what might be happening: * The latch switches might be misaligned. * There could be a loose or broken connection in the high voltage circuit, especially the magnetron filament circuit. High contact resistance can lower the magnetron filament voltage, leading to reduced output or intermittent oscillation. * One or more high voltage components (H.V. Transformer, H.V. Capacitor, H.V. Diode, H.V. Fuse, or Magnetron) could be faulty. * There might be loose or broken wiring in the power relay. * The primary latch switch could be defective. * The power relay or the Ass'y PCB might be faulty. To resolve this, adjust the door and latch switches. Also, inspect t...
Why is my Samsung Microwave Oven cooking food unevenly?
Uneven cooking in your Samsung Microwave Oven can be due to the uneven intensity of microwave due to its characteristics. To mitigate this, wrap thinner parts of the food with aluminum foil. Use plastic wrap or cover with a lid. Stir once or twice while cooking foods such as soup, cocoa, or milk.
Why is my Samsung CE945G dead but the fuse is OK?
If your Samsung Microwave Oven is completely dead (no display, no operation) but the fuse is okay, the cause could be an open or loose lead wire harness, an open thermal cutout (Magnetron), an open low voltage transformer, or a defective Ass'y PCB. Check the fan motor when the thermal cutout is defective. Check Ass'y PCB when LVT is defective.
Why is the microwave output low on my Samsung CE945G Microwave Oven?
If your Samsung Microwave Oven has low microwave output and takes longer to cook food, this may be due to a decrease in the power source voltage, open or loose wiring of the magnetron filament circuit, or the aging of the magnetron. It is recommended to consult an electrician.
General| Power Output | 900W |
|---|---|
| Weight | 21.5 kg |
| Turntable | Yes |
| Convection | No |
| Cavity Material | Enamel |
Precautions to avoid excessive microwave energy exposure during servicing operations.
General safety rules, handling instructions, and warnings for microwave oven repair.
Specific procedures and warnings related to high voltage circuits and components.
Step-by-step guides for replacing major internal components of the microwave.
Procedures and standards for measuring microwave energy leakage from the oven.
Identifying and resolving electrical malfunctions based on symptoms and causes.
