Samsung CK331EZR4X/BWT - Page 31

4-3-7 White Balance Adjustment
Alignment and Adjustments
Samsung Electronics 4-17
Fig. 4-2 Convergence Magnet Assembly
4 Pole Magnet
6 Pole Magnet
2 Pole Magnet
Clamper
Screw
2 POLE
PURITY
YOKE
CLAMP
SCREW
6 POLE
CONVERGENCE
4 POLE
CONVERGENCE
ADJUST THE ANGL
(VERTICAL LINES)
Fig. 4-3 Center Convergence Adjustment
31m/m
Vertical Green Belt
Fig. 4-4
1
2
(a) Set up
1. Warm up the TV for at least 30 minutes in the
Aging Mode (OSD White). This mode is dis-
played by entering the following sequence:
SLEEP →FACTORY → FACTORY
2. Input a Toshiba pattern.
(b) High-Light Adjustment
1. Set SBT to 2.0 fL in the Factory Service
Mode with using CA100. See Fig. 4-4 ➁.
2. Adjust RG,BG so that the levels are suitable to
each local area.
(c) Low-Light Adjustment
1. Set SCT to 50.0 fL in the Factory Service Mode
with using CA100. See Fig. 4-4 ①.