Alignment & Adjustment
3-6 Samsung Electronics
3-4 Service Adjustment
3-4-1 Adjusting the Picture Size
Since the KS9C chassis has the deflection settings data within the Factory Data, the picture size has to be adjusted when
replacing Main Board, according to the following procedures.
ྙDisplay the Lion pattern.
ྚPress "Power Off ˧MUTE˧1˧8˧Y˧Power On "
using the remote control and enter Factory Mode.
ྛEnter Deflection Mode.
ྜAdjust the VA, VS,VSL and HS items so
that the width becomes 5 and the height becomes 4.
To Next Page
Loading...
