Media and tray
32
2. Menu Overview and Basic Setup
2
Squeeze and the paper width guide and paper length lever to locate
them in the correct paper size slot marked at the bottom of the tray to
adjust to the size (see "Tray overview" on page 30).
3
Flex or fan the edge of the paper stack to separate the pages before
loading papers.
4
After inserting paper into the tray, squeeze the paper width guides and
paper length guide.
1 Paper length guide
2 Paper width guide
CLP-41xN Series/CLP-41xNW Series
CLP-68xND Series/ CLP-68xDW Series
CLP-41xN Series/CLP-41xNW Series
CLP-68xND Series/ CLP-68xDW Series
2
1
2
1
To Next Page
Loading...
