Setting up the hardware_ 23
Installing the accessory box
You can keep the cleaning cloth, scanner locking screw, etc. in the accessory box. You can also keep the screws, rubber
packing, etc. that are left after optional item installation.
Follow the steps below:
• The accessory box is provided for user’s convenience. There are no problems using the machine without the
accessory box.
• You can attach the accessory box to any location. When you attach the accessory box, consider possible
disturbance of the DADF, control panel, trays, etc due to the accessory box.
1. Remove the protecting sheet on the sticker.
2. Attach the accessory box. We recommend you attach it to the location as shown below.
To Next Page
Loading...
