Initial settings and testing of the machine_ 51
10. Place the front of the print test chart face down on the scanner glass. The print test chart has A (Front Side) on the
front page.
11. Press Start from the control panel.
If you select Apply to all trays, the trays that are not selected also have the print adjustment results appllied.
We recommend performing print adjustment for each tray individually to optimize each tray’s settings. Print
adjustment results performed in this way will be better than using Apply to all trays.
12. Follow the steps on the display screen. When print adjustment is finished, remove the print test chart on the scanner
glass.
To Next Page
Loading...
