Initial settings and testing of the machine_ 56
3. Press Machine Setup from the display screen.
4. Press Machine Setup > General Settings > Machine Test.
5. Press ID’s input area. The pop-up keyboard appears.
Enter the name which is entered in the initial setting step 6 (See "Press the Name input area." on page 45).
Then press OK on the pop-up keyboard.
You can also select the ID pressing Recent users.
6. Press Password’s input area. The pop-up keyboard appears.
Enter the password which is entered in the initial setting step 6 (See "Press the Name input area." on page 45).
Then press OK on the pop-up keyboard.
7. Press Domain’s input area. The pop-up keyboard appears.
Press L, O, C, A, L and press OK on the pop-up keyboard.
You can also select the domain name pressing Domain List.
The domain name may differ for your machine depending on its options or models.
8. Press OK.
To Next Page
Loading...
