Samsung CLX-FIN40S User Manual (English)

Kathleen FlowersAug 1, 2025

What to do if there is a paper jam at the exit of the Samsung CLX-FIN40S Finishers bridge?

S
Samuel ChanAug 1, 2025
If you experience a paper jam at the exit of the finisher bridge, take the following steps: * Check the finisher, bridge, and IOT paper path for any paper and remove it. * Ensure the bridge open cover is closed correctly. * Look for any objects obstructing the bridge paper path and remove them. * Verify the idle rollers on bridge covers, one-way clutch bearings and timing belts are assembled correctly.

Brand	Samsung
Model	CLX-FIN40S
Category	Finishers
Language	English

Brand

Samsung

Model

CLX-FIN40S

chapter 1 Specification

1.1 General Specifications

Detailed specifications covering size, weight, temperature, humidity, and reliability.

1.2 Finisher Specifications

Technical details specific to the finisher module, including speed, stack capacity, and paper handling.

1.3 Booklet Maker Specifications

Specifications for the booklet maker function, such as speed, capacity, and staple capability.

1.4 Media Specifications

Guidelines on paper types, sizes, orientation, and output compatibility.

1.5 Tray Capacity Specifications

Information on the paper capacity for the main, top, and booklet maker trays.

1.6 Mode Feature

Explanation of the different operating modes available for the finisher.

1.7 Staple Set Specifications

Details on staple clinching positions, accuracy, leg quality, and capability.

1.8 Hole Punch Specifications

Technical specifications and dimensions for the hole punch functionality.

1.9 Booklet Maker Specifications

Specifics on booklet folding quality, staple leg quality, and within-set registration.

chapter 2 System Configuration

2.1 Front sectional view

Illustration and identification of sensors and rollers in the front section of CLX-FIN40S.

2.2 Paper path

Diagrams illustrating the paper flow for CLX-FIN40S and CLX-FIN40L models.

2.3 Layout of electrical parts

Identification of electrical components like sensors and motors for CLX-FIN40S.

2.4 Function of units

Description of the purpose for each functional unit within the CLX-FIN40S finisher.

2.5 Block diagram

Overview of the system's board construction and the function of each board.

2.6 Plug and jack location list

Lists and locates connectors on the Finisher Main board and Bridge Drive board.

chapter 3 Replacement procedure

3.1 General precautions on disassembly

Safety guidelines and general advice before disassembling the finisher and bridge units.

3.2 CLX-FIN40S disassembly

Step-by-step instructions for disassembling the CLX-FIN40S finisher frame and components.

3.3 CLX-FIN40L disassembly

Step-by-step instructions for disassembling the CLX-FIN40L finisher frame and components.

chapter 4 Troubleshooting

4.1 Error code and error message

A table listing error codes, their messages, and corresponding troubleshooting pages.

4.2 Troubleshooting for error code

Detailed methods and checks for resolving specific error codes encountered in the finisher.

4.3 Finisher Self-Test Mode

Instructions on how to use and set the finisher's self-test modes via DIP switch.

4.4 Adjusting the staple position (CLX-FIN40L)

Guide for adjusting staple position on the CLX-FIN40L booklet maker using DIP switches.

4.5 Adjusting the Paper Skew (CLX-FIN40L)

Procedure for adjusting the paper skew on the CLX-FIN40L by moving the stopper.

Samsung CLX-FIN40S User Manual

Table of Contents

Questions and Answers:

Samsung CLX-FIN40S Specifications

Summary