To Next PageTo Next PageHow to fix uneven cooking in Samsung CM1629?
If your Samsung Microwave Oven is cooking food unevenly, it is due to the uneven intensity of microwave distribution, which is a characteristic of the appliance. Wrap thinner parts of the food with aluminum foil. Use plastic wrap or cover with a lid. Stir once or twice while cooking foods such as soup, cocoa, or milk.
Why won't my Samsung Microwave Oven accept key inputs?
If your Samsung Microwave Oven does not accept key inputs (program), it could be due to the key input not being in sequence, an open or loose connection of the membrane keypad to the Ass’y PCB, a shorted or open membrane panel, or a defective Ass’y PCB. Refer to the operation procedure. Replace the PCB main.
Why does my Samsung CM1629 stop during cooking?
If your Samsung Microwave Oven stops operating during cooking, it could be due to the operation of the thermal cutout (on the Magnetron or Cavity) or a non-rotating fan motor. Adjust the door and latch switches. Replace the fan motor.
Why does my Samsung CM1629 Microwave Oven not operate and return to plugged-in mode?
If your Samsung Microwave Oven does not operate and returns to the plugged-in mode, it's likely due to a defective Ass’y PCB. Replace the PCB main.
What does E1 error mean on a Samsung CM1629?
If your Samsung Microwave Oven displays 'E1', it could be due to an improper input power frequency or a defective Ass’y Main P.C.B. Check if the power frequency is 50Hz. Replace the Ass’y Main P.C.B or MICOM.
Why does my Samsung Microwave Oven stop in the middle of cooking?
If your Samsung Microwave Oven stops operating during cooking, it might be due to the activation of the thermal cutout (either on the Magnetron or Cavity) or because the fan motor is not rotating. Adjust the door and latch switches. Replace the fan motor if needed.
Why is my Samsung CM1629 Microwave Oven turntable motor noisy?
Noise from the turntable motor when it starts to operate in your Samsung Microwave Oven may result from the motor itself. Replace the turntable motor.
What to do if my Samsung CM1629 shows E3 error?
If your Samsung Microwave Oven displays error code E3, it could be due to overheating inside the cavity because there's no load or too little load. Try plugging the power cord in again. Also, check for any blockages around the air exhaust area or ventilation openings. If the error persists, check the resistance of the Thermistor sensor and replace it if defective. The ventilation motor might be failing and causing the magnetron to overheat; replace the motor if necessary.
Why is my Samsung Microwave Oven making a loud buzzing noise?
A loud buzzing noise in your Samsung Microwave Oven can be caused by several issues: loose fan or fan motor, loose screws on the H.V. Transformer, a shorted H.V. Diode, or loose/missing screws on the Cover-Back. To resolve this, tighten the screws of the fan motor and the H.V. Transformer. Replace the H.V. Diode if necessary, and ensure all screws on the Cover-Back are tightened.
Why is my Samsung Microwave Oven sparking?
Sparks inside your Samsung Microwave Oven are often caused by metallic ware or cooking dishes touching the oven wall. Ceramic ware trimmed with gold or silver powder can also cause sparks. To prevent this, ensure you are using microwave-safe cookware and avoid items with metallic trimming.
General| Brand | Samsung |
|---|---|
| Model | CM1629 |
| Category | Microwave Oven |
| Language | English |
Crucial safety guidelines for handling microwave ovens during service and repair.
Essential safety measures for working with high voltage components and circuits.
Procedures for removing and replacing the magnetron and high voltage transformer.
Procedures for safely removing and replacing the high voltage capacitor.
Methods for measuring magnetron output power, heat distribution, and microwave leakage.
Common electrical problems, causes, corrections, and error code resolutions.
