English - 3
◆ Source List
You can switch between
viewing signal from
connected equipment, such
as a VCR, DVD, set-top box,
and the TV source
(broadcast or cable).
➢
You can change the required external source simply
by pressing the SOURCE button on the remote
control. It might take a short period of time for
pictures to be switched. To return to the TV mode,
press the TV button on the remote control.
◆ Edit Name
You can give a name to the
external source.
Input
(depending on the model)
-
Source List / Edit Name
Move Enter Return
TV
AV1 ----
AV2 ----
Componet ----
Source List
TV
Move Enter Return
AV1 : ----
AV2 : ----
Component : ----
Edit Name
TV
----
VCR
DVD
Cable STB
Sat.STB
AV Receiver
DVD Receiver
††
he
e
sic
o
ff)
.
It
e
2 Select the appropriated language by pressing the … or
† button. Press the ENTER button.
The Check antenna
input. is displayed.
➢
If any language is not
selected, the language
menu will disappear
about 30 seconds later.
3 Make sure that the antenna
is connected to the
television (refer to page 1).
Press the ENTER button.
The Area menu is
displayed.
4 Press the … or † button to
select your area. Press the
ENTER button.
5 To search the channels,
press the ENTER button. To
stop the search, press the
ENTER button.
When the channel
searching has finished, the
Clock Set menu is
displayed.
6 Press the œ or √ button to
move to the hour or minute.
Set the hour or minute by
pressing the … or † button.
7 When you have finished,
press the MENU button.
The Enjoy your
watching. is displayed, and then the channel which
has been stored will be activated.
Re-setting the Plug & Play
Method: MENU ➜
……
/
††
(Setup) ➜ ENTER ➜
……
/
††
(Plug & Play) ➜ ENTER
Viewing the Menus
1 Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
Setup.
2 Press the … or † button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
3 Press the … or † button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4 Press the …/†/œ/√ button to change the selected
items. Press the MENU button to return to the previous
menu.
5 Press the EXIT button to exit from the menu.
Setup - Plug & Play
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1 If the television is in standby
mode, press the POWER
button on the remote
control.
The Start Plug & Play
is displayed. To start Plug &
Play, press the ENTER
button. The Language
menu is displayed.
➢
The Language menu
will automatically
appear after several
seconds, even if the ENTER button is not pressed.
continued...
Move Enter Return
Plug & Play
√√
Language : English
√√
Time
√√
Child Lock
√√
Blue Screen : Off
√√
Melody : On
√√
Demonstration
√√
Setup
TV
Plug & Play
Enter Return
OK
Start Plug & Play
Plug & Play
Move Enter Skip
Language
English
Français
Türkçe
Plug & Play
Enter Skip
OK
Check antenna input.
Plug & Play
Move Enter Skip
Area
Asia/W.Europe
CIS/E.Europe
China
Hong Kong/UK
Australia
NZL/Indonesia
South Africa
America
Plug & Play
Enter Skip
Stop
Auto Store
P 1 C-- 102MHz
7 %
Plug & Play
Enter Skip
Start
Auto Store
Plug & Play
Move Enter
Adjust Skip
Clock Set --:-- am
OK
Enjoy your watching.
AA68-03850A_02Eng_m.asia 8/30/06 1:00 PM Page 3
To Next Page
Loading...
