Disassembly & Reassembly
Samsung Electronics 3-3
Part Name Description Description Photo
Chassis
Holder
①
Separate the cable connecting the FBT and CRT
from the CRT.
Since a high voltage current resides inside the CRT,
do not to touch the CRT hole with metal or your body
when separating the cable.
3-1-3 Disassembling the CRT Ass’y
Part Name Description Description Photo
CRT
Ass’y
①
Separate the cables connecting the Main Ass’y and the
CRT Ass’y.
Pull the wires while
pressing on the fixing clip.
①
Separate the wires from the FBT of the Main Board and
the CRT Ass’y.
②
To separate thick wire, pull the wires while pressing the
push-type clip at the connector.
Take care when separating the wires because pulling
the wires by force may damage the socket. In addition,
separate
the wires on a flat and clean surface so as to prevent
scratching of the material and the PCB.
Pull the wires while
pressing on the fixing clip.
To Next Page
Loading...
