42
ENG
You can store up to four teletext pages to display them later at
leisure.
1 Select the LIST mode using the button.
Result
: Four 3-digit numbers are displayed in different
colours.
➣
The button is used to switch between the LIST and
FLOF modes.
2 Press the colored button corresponding to the page that will be
replaced.
3 Enter the new page number using the numeric buttons.
4 Repeat steps 2 and 3 for each page to be stored, using a
different colored button each time.
5 Press the (store) button until the corresponding blocks blink.
Using FLOF to Select a Page (depending on the model)
The various topics included in the teletext pages are color-coded,
and can be selected by pressing the colored buttons on the remote
control.
1 Display the teletext contents page by pressing the TTX/MIX ()
button.
2 Press the colored button corresponding to the topic that you wish
to select;the available topics are given on the status line.
Result
:
The page is displayed with other colored information
that can be selected in the same way.
3 To display the previous or next page, press the corresponding
colored button.
4 To display the subpage, see the following steps.
◆
Press the (sub-page) button.
Result
: The available subpages appear.
◆
Select the required sub-page. Sub-pages can be scrolled by
using the
TURBO (Red) or S.MENU (Green) button.
Storing Teletext Pages (depending on the model)
AA68-03418A-00Eng_UMG_TM76 6/2/04 11:49 AM Page 42
To Next Page
Loading...
Need help?
General