Samsung D1070 - Quick View; Display SAVE; Settings; Formatting a Memory

48
Display ( )
If you enable Quick View before capturing an image, you can view
the image you just captured on the LCD monitor for the duration
set in the [Quick View] setup. Quick view is possible only with still
images.
- Sub menus
[Off] : The quick view function
can’t be activated.
[0.5, 1, 3 sec] : The captured image is
briefl y displayed during
the selected time.
Quick view
If you set the [Display SAVE] to On and the camera isn't operated
during the specifi ed time, the LCD monitor will be turned off
automatically.
- Sub menus
[Off] : The LCD monitor will not be turned off.
[On] : If the camera isn't operated
during the specifi ed time
(about 30 SEC.), the camera
power will be idle (Camera status
lamp:Blinking) automatically.
Ä
You can’t set the [Display SAVE] menu of Playback Mode.
Display SAVE
DISPLAY
Display Bright

Language

Date&Time

On
Off
Back Set
OK

Start Image

Quick View

Display SAVE

DISPLAY
Display Bright

Date&Time

Start Image

Back Set
OK

Language

Display SAVE

Quick View

1 sec
Off
3 sec
0.5 sec
This is used for formatting the memory. If you run [Format] on
the memory, all images, including the protected images, will be
deleted. Be sure to download important images to your PC before
formatting the memory.
- Sub menus
[No] : The memory will not be formatted.
[Yes] : A window for confi rming the se-
lection displays. Select the [Yes]
menu. A [Processing!] message
appears and the memory will be
formatted. If you run FORMAT in
Play mode, a [No Image!] mes-
sage will appear.
Formatting a memory

Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card
- A memory card that has a fi le this camera can't recognise or
one that has been taken from another camera.
- Always format the memory card using this camera. If you insert
a memory card that has been formatted using other cameras,
memory card readers, or PCs, you will get a [Card Error!]
message.
SETTINGS
Imprint

Reset

File

Back Set
OK

Power Off

Video Out

No
Yes
Format

Settings
(
”
)