15
Ⅱ.INSTALLATION&FAQ
3. After restarting the computer, connect the PC to the camera with the USB cable.
● If you have installed the camera driver, the [Found New Hardware Wizard] may not open.
● On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens and a window asking
you to select a driver file may appear. In this case, specify "USB Driver" in the CD supplied. (for Windows 98
and 98 SE).
● PDF documents of user manual are included in the Software CD-ROM supplied with this camera. Search the
PDF files with Window's explorer.
Before opening the PDF files, you must install the Adobe Reader included in the Software CD-ROM.
● To install the Adobe Reader 6.0.1 correctly, Internet Explorer 5.01 or later had to be installed. Visit
"www.microsoft.com" and upgrade the Internet Explorer
4. Turn the camera power on.
The [Found New Hardware Wizard] will open and the
computer will recognise the camera.
※ If your OS is Windows XP, an image viewer program will
open.
If the download window of Digmax Master opens after
starting Digimax Master, the camera driver was set up
successfully.
To Next Page
Loading...
