Samsung DIGIMAX S1000 - Page 46

Codes of program
Insert the PROCESS CODE that you want to adjust
65535..-->..DEFAULT
Insert the PROCESS CODE that you want to adjust
Insert 1 to write adjusted code to the EEPROM
To save the result data to the SD card, insert 1 or 0
Insert each adjustment item's condition (See each adjustment item)
Insert each adjustment item's condition (See each adjustment item)
Not used
Not used
Not used
Not used
Not used
Not used
0..-->..DEFAULT
0..-->..DEFAULT
PROGRAM
<1>PROCESS CODE ;
<2>65535 ;
<3>PROCESS CODE ;
<4>0 OR 1 ;
<5>0 OR 1 ;
<6>CONDITION ;
<7>SPEC ;
<8>NOT
<9>NOT
<10>NOT
<11>NOT
<12>NOT
<13>NOT
<14>0
<15>0
49
Ⅳ.ADJUSTMENT
Use the Memo pad of Basic Windows program and save it as " STS2_103ADJ.txt ".
※ SD CARD SHOULD BE FORMATTED BEFORE USING.
※ After inserting each code, [;] mark has to be inserted.
< Description of TXT file >
4. Flow chart for the adjustment