62
Ⅳ.ADJUSTMENT
7) FOCUS ADJ
After changing the MAIN PCB and BARREL, adjust the PUNT.
Required Equipment : Chart for FOCUS adjustment,Tripod
< How to adjust >
a... Arrange a chart for adjust the FOCUS.
b... Attach the camera to the tripod.
c... The distance between the chart and the camera should be 80cm.
d... Download the program and save it to SD memory card
e... Insert the SD memory card that has the program file and turn on the camera.
f... The adjustment will be done automatically.
g... After completing the upgrade, the camera is turned off
automatically.
If the adjustment is incomplete, <Figure 7-2> will display. In
this case, re-try the adjustment process.
<Figure 7-1>
<Figure 7-2>
To Next Page
Loading...
