Samsung DIGIMAX S1000 - Page 61

64
Ⅳ.ADJUSTMENT
8) BURNING TEST
BURNING TEST : After changing the MAIN PCB and parts, check whether all of the camera functions work
correctly.
CCD DEFECT CELL : After changing the MAIN PCB and CCD, adjust the DEFECT CELL of CCD.
< Description of TXT file >
When making or modifying the program, see the following program codes.
When modify the program, use the Memo Pad of Windows and save it as “STS2_103ADJ.txt”.
<How to test>
a...Type step <6> by using the table shown below.
Ex.> <6>20,14,1,2,4,3,6,7,8,9,10,11,12,13,14,15,,1,,1,1,1,1,3000,400,6,20000,0,65535,0;
1st number means : Repeat time (To repeat this adjustment 20 times, put 20.)
2nd number means : Number of codes (As there are 14 codes -1,2,4,3,6,7,8,9,10,11,12,13,14,15 -, put 14.)
From the 3rd to last number means : see the table.
4th number means : for CCD DEFECT CELL
PROGRAM
<1>PROCESS CODE ;
<2>65535 ;
<3>PROCESS CODE ;
<4>0 OR 1 ;
<5>0 OR 1 ;
<6>CONDITION ;
<7>SPEC ;
<8>NOT
<9>NOT
<10>NOT
<11>NOT
<12>NOT
<13>NOT
<14>0
<15>0
Description of codes
<1>10;
<2>65535;
<3>10,0;
<4>1;save to e2prom
<5>1;don't save to sd card
<6>20,14,1,2,4,3,6,7,8,9,10,11,12,13,14,15,,1,,1,1,1,1,3000,400,6,20000,0,65535,0;
<7>;
<8>;
<9>;
<10>;
<11>;
<12>;
<13>;
<14>65535;
<15>0;close lens