Filling the rinse aid dispenser
Your dishwasher has been designed to use liquid rinse aid.
The use of a rinse aid greatly improves the drying performance after the final rinse.
1. Turn the dispenser knob counterclockwise to open the
cover.
2. Pour rinse aid into the opening until the indicator points to
“MAX.” Avoid overfilling the dispenser.
3. Adjust the amount of rinse aid released during the rinse
operation.
You can adjust the amount over four levels (1~4). The
greater the number, the larger the amount of rinse aid
released. The factory default is 3.
When the rinse dispenser is filled up, it is good for about 40
washes.
4. Close the cover.
Turn the dispenser knob clockwise.
We strongly recommended using only liquid rinse aid.
To Next Page
